Things you should know about the Leaf buddi UI Mod

Why we call this mod “UI”? Well, UI is short for unique and iconic.

Like it or not, the UI mod from Leaf buddi catches your attention by its unique design. Unlike the normal box mod, or slim battery, the UI mod looks like a “U” shape pipe, which is not very common.

But this blog is not for bragging its special design, but for showing you guys how to use the UI mod correctly.

 

The UI mod is a simple mod, very easy to operate & extremely friendly for new starters. It got 2 ends and a LED bar in the middle.

The one end features the 510 connector, so you can use any kind of 510 carts on this mod. And the other end is the fire button.

How to turn on the mod？

Like other mod, press the fire button 5 times to turn on and off. When you turn the mod on, the LED bar in the middle will blink 3 times. And when you press the fire button to vape, the LED bar will keep lighting on.

VOTL: 2.7V

VOLT: 3.3V

VOLT: 3.7V

VOLT: 4.1V

How many volt options? And how to switch different volts? And why we need different volts?

Ok, offering different volts for option is kind of like the basic function for a mod. Higher volt will offer you higher temperature. Depends on the preference, customers can choose the most comfortable volt for vaping.

And the UI mod has 4 volt levels for option: 2.7V, 3.3V, 3.7V, 4.1V.

To change the volt, you just need to click the fire button 3 times. When you change the volt, the LED bar will change the color accordingly, and blink 3 times.

Like when you switch the volt to 2.7V, the LED bar color will be green, and blinks 3 times. And when you stick to this volt for vaping, the LED bar will keep lighting up green.

And when you switch to 3.3V, the LED bar will be changed to white color. And blue for 3.7V, red for 4.1V.

What cart can be used on the UI mod?

Like we mentioned, the UI mod got the 510 connector, which means all 510 cartridges can be used on this mod. But since there’s a short tube, cartridge that bigger than 1.5cm in diameter does not fit.

Is there indicator when I charge the UI mod, and any indicator when it’s fully charged?

Surely yes. There’s a very small LED light that near the Micro USB charger port. It’ll turn red when you charge the UI Mod.

Also, the UI mod features a 650mAh built-in battery, and normally the output current of USB cable is around 400mA. Which means, it takes about 1 hour and a half to fully charge the UI mod.

When the battery is fully charged, the LED will turn green.

Notice:

It’s never wise to over-charge the battery. So please don’t charge the battery over night, or longer than 3 hours. It’ll harm the battery life.

OK, above it’s all you need to know about how to operate the Leaf buddi UI Mod. If you still got any question, leave us a MSG & let us know.

Have a nice day!

CLICK THE BUTTON BELOW TO SHOP THE LEAF BUDDI UI MOD

START SHOPPING